ENGLISH
Switches under the drip tray
Water tank/Direct water supply switch:
This switch allows you to select the kind of water supply (water tank or direct
water connection).
Pos. 0: water tank
Pos. 1: direct water connection
Steam boiler switch:
This switch allows you to activate or deactivate the steam boiler
Pos. 0: Steam boiler is deactivated.
Pos. 1: Steam boiler is activated.
Please remove the drip try to reach the switches.
Alternatively, the steam boiler switch can also be reached from underneath the chassis
without moving the machine.
3.2 Technical data
Voltages: EU: 230 V
UK: 230 V
New Zealand: 240 V
Australia: 240 V
US: 115 V
Japan: 100 V
Power: 1600 W
Water tank: ca. 2.8 l
Measurements: B x T x H / 340 mm x 475 mm x 420 mm
Measurements with portafilter: B x T x H / 340 mm x 590 mm x 420 mm
Weight: 31 kg
3.3 PID-Temperature Control
The function of a PID-Temperature Control is to regulate the temperature of both boilers. The temperature
of the boilers are programmable and controlable independently from each other. You have the possibility
to extract coffee at varying temperatures and steaming with different pressure. PID stands for
-integral-
The PID-control shows the temperature of the coffee boiler and the steam boiler alternately. The position
of the period indicates which boiler´s temperature is currently being displayed.
Temperature coffee boiler (t1, here 93°C)
-period in the 1st position
Temperature steam boiler (t2, here 124°C)
-period in the 3rd position
To Next Page
Loading...
