ENGLISH
Translation of the German original user manual 35
7.3 Maintenance
Replacing the group gasket and the shower screen
Switch off the machine, disconnect the power cord and let the machine cool down.
Follow the steps as indicated below:
1. Brew group in the beginning,
lower view.
2. Use a flat screwdriver to pry
out the shower screen and
the group gasket.
3. The shower screen and the
gasket are now nearly
removed.
4. Remove the shower screen
and the gasket completely.
5. Keep the new spare parts
ready at hand (the rounded
side of the group gasket
with PROFITEC print faced
upwards to the brewing
group).
6. Clean the group with a
brush. Lock the shower
screen firmly into the
gasket.
7. Insert the shower screen
into the brew group.
8. Take the portafilter without
filter.
9. Clamp the portafilter into the
brew group.
10. Then, move the portafilter
until the shower screen is
locked firmly into the gasket.
11. Now you can easily lock the
portafilter into place.
12. The group is ready for use.
The machine can be used again, as described in chapter 6 of the instruction manual.
To Next Page
Loading...
