B
Barbara ChurchJul 30, 2025
What to do if ProForm 495Pi PFTL33105.0 Treadmill power does not turn on?
- RRobert OwenJul 30, 2025
First, ensure the power cord is plugged into a surge suppressor, and the surge suppressor is plugged into a properly grounded outlet, using a single-outlet surge suppressor. Next, verify that the key is fully inserted into the console. Finally, check the reset/off circuit breaker located on the treadmill frame near the power cord. If the switch protrudes, the circuit breaker has tripped; wait five minutes, then press the switch back in to reset it.













