ProLights CROMOBEAM250 - Keylock Functionality; Viewing Fixture Information; Resetting to Default Settings

CROMOBEAM250
18
Keylock function
• Press the MENU button and select, via the directional buttons, the [Intro] menu choice, then press the
ENTER button to conrm the choice.
• Press the UP and DOWN buttons to select [Keylock] menu voice and conrm the choice by pressing the
ENTER button.
• Select a display mode [On] or [Close].
When the xture is set as pass [On] after 30 seconds or turn on the xture next time, the xture will need
an access password to enter the display menu control.
NOTE. The factory access password is UP + DOWN + UP + DOWN. Press ENTER to conrm the access.
Fixture information
• Press the MENU button and select, via the directional buttons, the [Intro] menu choice, then press the
ENTER button to conrm the choice.
• Press the UP and DOWN buttons to select [Info] menu voice and conrm the choice by pressing the
ENTER button. The display will show the installed software version.
Default function
• Press the MENU button and select, via the directional buttons, the [Intro] menu choice, then press the
ENTER button to conrm the choice.
• Press the UP and DOWN buttons to select [Default] menu voice and conrm the choice by pressing the
ENTER button.
• Select [Yes] to default the xture to its original factory settings