J
Jason FrostSep 13, 2025
What to do if ProMinent Controller's servomotor is defective?
- RRobert MichaelSep 13, 2025
If the servomotor of your ProMinent Controller is defective, service is required via a service call.
To Next PageTo Next PageWhat to do if ProMinent Controller's servomotor is defective?
If the servomotor of your ProMinent Controller is defective, service is required via a service call.
General| Brand | ProMinent |
|---|---|
| Model | DULCOMETER D1C |
| Category | Measuring Instruments |
| Language | English |
Specifies the measured variable, Chlorine, and its range.
Defines control characteristics like Proportional or PID control.
Explains the operational functions and capabilities of the controller.
Guides on how to operate the DULCOMETER® D1C controller.
Details the complete operating menu for advanced settings.
Covers common faults, remarks, and troubleshooting steps.
Details processing of feed forward signals for control.
Explains how error messages are indicated and acknowledged.
Details the process for calibrating the Chlorine sensor.
Details the process for calibrating the pH sensor.
Configuration of control modes like normal, dead zone, and PID.
Step-by-step guide for calibrating the Chlorine sensor.
Detailed control settings including setpoints, PID parameters, and additional load.
Details the two-point calibration process for the pH sensor.
Detailed calibration for Chlorine sensor zero point and slope.
Faults related to measured value, checkout time, and sensor input.
Faults related to correction variable and pH calibration.
Faults related to limit transgression and specific sensor types.
Faults related to feed forward input signal.
Faults related to servomotor position and electronics.
General system errors and electronic faults.
