M714_User_Master.doc
Updated Aug. 25, 2015 8
1.2 Checking & Clearing Alarms 3 of 3
RESET RELAY USING CLEAR ALARMS
.
Key UP or DOWN to the output relay
& key ENTER
.
Any relay can be reset
.
This example is a Biocide pump with 16.6 minutes
of ON time remaining
.
Key DOWN to Alarms & ENTER
.
.
Key DOWN to ‘Reset Alarm & Time & ENTER
Relay 4 will turn OFF
.
Biocide feeds and prebleeds will end
If this relay is timing a biocide lockout, it will end
.
Special controls like Bleed & Feed, % Time
or Boiler Captured Sample controls will restart.
.
.
.
After you key ENTER you see the value of the relay
feed limit timer.
.
.
Key EXIT twice
& you’ll see that Relay 4 is now OFF
.
.
Relays don’t need to be ON to be reset
You may wish to restart special control
Or end the lockout of a bleed relay
To Next Page
Loading...
