To Next PageTo Next Page
Need help?Do you have a question about the ProMinent diaLog DACb and is the answer not in the manual?
General| Operating Temperature | 0 to 50 °C |
|---|---|
| Digital outputs | 2 |
| Protection class | IP65 |
| Data logger | Yes |
| Housing | Plastic |
| Input Voltage | 100-240 V AC, 50/60 Hz |
| Output Signal | 0/4-20 mA |
| Communication Interface | Modbus RTU |
| Display | Graphic display, backlit |
| Measured variables | pH, ORP, conductivity, temperature |
Requirements for operating the PROFINET® controller.
Visual guide to the terminal connections on the DAC communication unit.
Steps for adjusting the controller and configuring PROFINET® settings.
Unique functionalities and behaviors when the controller operates in PROFINET® mode.
Guidance on installing the PROFINET® module and general operational procedures.
Details output data objects for channels, including measured values, status, and warnings.
Explanation of bit fields for channel status, control parameters, and SD card status.
Detailed list of bit fields representing various error conditions for the controller channels.
Explanation of bit fields indicating warning states for the controller channels.
Definition of bit fields used for configuring alarm and general purpose relays.
Bit field definitions for channel configuration, including remote control and parameter sets.
Lists diagnostic messages and describes controller behavior upon PLC errors.
