ProMinent diaLog DACb - Bit Field Definitions: Channel Warnings

1.7.3 Warning of the channel
Bit Description
15
14
13
12
11
10
9
8
7
6 Warning 73: The fan has a fault; [The fan has an error]
5 Warning 72 The time must be checked; [The time must be checked]
4 Warning 71 The battery needs to be replaced; [The battery must be replace]
3 Warning 4 The measuring channel is not yet calibrated;
[The measuring channel is not yet calibrated]
2 Warning 3 The wash timer has timed out. Maintenance is required;
[The wash timer has timed out. Maintenance is necessary]
1 Warning 2 The limit value was exceeded; [The limit was exceeded ]
0 Warning 1 The limit value was not reached; [The limit was undershot]
Supplementary Instructions for PROFINET
®
17