ProMinent Sigma/ 1 Basic S1Ba - Stroke Actuator; Stroke Control Drive; Diaphragm Rupture Sensor

Identity code
specification
Phases, protec‐
tion
Rated voltage Mains frequency Rated output Remarks
N 1-phase AC, IP
55
115 V ±5% 60 Hz 0.12 kW
L1 3-phase,
II2GEExeIIT3
220-240 V /
380-420 V
50 Hz 0.12 kW
L2 3-phase,
II2GEExdIICT4
220-240 V /
380-420 V
50 Hz 0.18 kW with PTC, speed
control range 1:5
P1 3-phase,
II2GEExeIIT3
250-280 V /
440-480 V
60 Hz 0.12 kW
P2 3-phase,
II2GEExdIICT4
250-280 V /
440-480 V
60 Hz 0.18 kW with PTC, speed
control range 1:5
Motor data sheets, special motors, special motor
flanges, external fan, temperature monitoring
– For further information on the motor with identity
code specification "S", refer to our website
www.prominent.com. Motor data sheets can be
requested for all other motors.
– With motors other than those with identity code
specifications "S", "M" or "N": Pay special attention
to the operating instructions for the motors.
– Special motors or special motor flanges are avail‐
able on request.
15.8 Stroke actuator
Voltage Mains frequency Capacity
230 V ±10% 50/60 Hz 11.7 W
115 V ±10 % 60 Hz 11.7 W
15.9 Stroke control drive
Voltage Mains frequency Capacity
230 V ±10% 50/60 Hz 6.5 W
115 V ±10 % 60 Hz 6.5 W
15.10 Diaphragm rupture sensor
Install the sensor according to the chapter "Installation,
electrical".
Tab. 3: Contact loading, max.
with voltage Maximum current
30 V DC 1 A
a) Contact (Standard with identity code
specification "Displacement body“: A)
Technical data
63