23 Declaration of Incorporation for Machinery
In accordance with DIRECTIVE 2006/42/EC OF THE EUROPEAN PAR‐
LIAMENT AND OF THE COUNCIL, Appendix I, BASIC HEALTH AND
SAFETY REQUIREMENTS, section 1.7.4.2. C.
We,
n ProMinent GmbH
n Im Schuhmachergewann 5 - 11
n D - 69123 Heidelberg, Germany,
hereby declare that the product specified in the following, complies with
the relevant basic health and safety requirements of the Directive, on the
basis of its functional concept and design and in the version distributed by
us. Technical documents were produced in line with Appendix VII Part B.
Any modification to the product not approved by us will invalidate this dec‐
laration.
Tab. 15: Extract from the Declaration of Conformity
Designation of the product: Metering pump without motor, product range Sigma
Product type: S1Ba _ _ _ _ _ _ _ _ _ _ _ _ _ _ § $ _ _
with characteristics
§ = "2" or "3" and $ = "0"
or § = "G" and $ = "G"
Serial number: see nameplate on the device
Relevant directives: Machinery Directive (2006/42/EC)
Compliance with the protection targets of the Low Voltage Directive 2014/35/EU
according to Appendix I, No. 1.5.1 of the Machinery Directive 2006/42/EC
Harmonised standards applied, in
particular:
EN ISO 12100:2010
EN 809:1998 + A1:2009 + AC:2010
Date: 20.04.2016
You can download the Declaration of Conformity at www.prominent.com.
For pumps without explosion protection:
Declaration of Incorporation for Machinery
87
To Next Page
Loading...
Need help?
General
