9 Set up/
‘Menu’
n Please also refer to all overviews covering "Operating/set up over‐
view" and "Operating menu for Sigma X Control type, complete" in the
appendix and the "Overview of equipment" and "Control elements"
chapters.
n The pump exits the menu and returns to a continuous display if
[Menu]
is pressed or if no key is pressed for 60 seconds.
The
‘Menu’
is sub-divided as follows:
1 -
‘Information’
2 -
‘Operating mode’
3 -
‘Settings’
4 -
‘Timer’
5 -
‘Service’
6 -
‘Language’
9.1
‘Information’
‘Menu / Information
è
...’
You can find out different information about your pump in the
‘Information’
menu. The number and type can depend on the pump settings.
9.2
‘Operating mode’
‘Menu / Information
è
Operating mode
è
...’
You can switch between the operating modes in the
‘Operating mode’
menu. You can enter the settings for this in the
‘Settings’
menu.
n
‘Manual’
n
‘Batch’
n
‘Contact’
n
‘Analogue’
9.3
‘Settings’
‘Menu / Information
è
Settings
è
...’
The
‘Settings’
menu generally includes these setting menus:
1 - The operating mode set (exception:
‘Manual’
)
2 -
‘Metering’
3 -
‘Calibrate’
4 -
‘Inputs/outputs’
5 -
‘System’
6 -
‘Set time’
7 -
‘Date’
Set up/
‘Menu’
44
To Next Page
