ProMinent Sigma X - Wearing Parts for S2 Cb; Standard; Physiological safety

20 Wearing parts for S2Cb
Refer also to the previous chapter.
20.1
Standard
Spare part Order no.
HMI wall bracket 1036683
HMI protective film 1083680
20.2 Physiological safety
Tab. 21: Scope of delivery with PVT material version
1 x diaphragm, 2 x valve balls, 1 x suction valve complete, 1 x discharge valve complete
1 x elastomer sealing set (EPDM)
2 x ball seat housings, 2 x ball seat discs, 4 x composite seals
1x sealing washer (for bleed valve or relief valve)
Tab. 22: Scope of delivery with SST material version
1 x diaphragm, 2 x valve balls
2 x cover rings
4 x composite seals
1x sealing washer (for bleed valve or relief valve)
Tab. 23: Spare parts kits PVT (liquid ends)
Liquid end Types 16050, 16090, 16130 Types 07120, 07220, 04350
FM 130 - DN 15 1046472 -
FM 350 - DN 25 - 1046475
Tab. 24: Spare parts kits SST (liquid ends)
Liquid end Types 16050, 16090, 16130 Types 07120, 07220, 04350
FM 130 - DN 15 1046473 -
FM 130 - DN 15 with 2 complete
valves
1046474 -
FM 65 - DN 10 - 1046476
FM 65 - DN 10 with 2 complete valves - 1046477
HMI spare parts
Spare parts kits
Ordering information
Wetted materials – "Physiologically safety
with regard to wetted materials" design
Wearing parts for S2Cb
97