5
Chapter 2: Installation and Setup
This chapter covers the following topics:
• Unpacking the SmartStor (below)
• Installing Disk Drives (page 7)
• Connecting to Your PC (page 8)
• Connecting the Power (page 9)
• Installing the Software (page 9)
• Setting Up the SmartStor (page 16)
Unpacking the SmartStor
The SmartStor DS4600 box contains the following items:
• SmartStor DS4600 Unit
• Screws for disk drives (1
package)
•eSATA bracket
• USB 2.0 cable, A to B, 1m
• eSATA cable, 1.5m
• FireWire 800 (1394b) cable, 1m
• Power cord, 1.5m
• CD with SmartNAVI software,
Product Manual and Quick Start
Guide
Warning
The electronic components within the SmartStor are sensitive to
damage from Electro-Static Discharge (ESD). Observe
appropriate precautions at all times when handling the SmartStor
or its subassemblies.
Warning
The fan contains hazardous moving parts. Keep fingers and other
body parts away.
Caution
Use of USB or FireWire cables longer than those supplied with the
SmartStor is not recommended.
Important
To configure the SmartStor, you must install SmartNAVI.
See “Installing the Software” on page 9.
To Next Page
Loading...
