Promise Technology SmartStor DS4600 - Setting up the Smartstor (Advanced); One Click Setup

SmartStor DS4600 Product Manual
38
Setting Up the SmartStor (Advanced)
SmartStor has three setup options:
• One Click Setup (below)
• Advanced Setup (page 39)
One Click Setup
One Click Setup loads a collection of default settings. Recommended for most
users. The Setup Wizard creates and formats your RAID volume automatically.
To perform a one-click setup:
1. Open the SmartNAVI Main Window.
See “Opening the Main Window” on page 19.
2. Click the Setup Wizard icon and click the One Click Setup button:
3. Click the OK button to continue.
The DAS reboots. Then your RAID volume is ready.
On a Windows PC, the SmartStor appears as a hard disk drive. See
page 46, Figure 4.
On a MAC, the SmartStor appears as a removable disk drive. See page 47,
Figure 6.