SmartStor DS4600 Product Manual
28
• RAID 1 – 2 drives
• RAID 5 – 3 or 4 drives
• RAID 10 – 4 drives
Click the Next button to continue.
6. Under Partition Setting:
• Type a volume name in the field provided.
• Choose a file system format from the dropdown menu.
• Check the Volumes support over 2.2TB capacity box if the volumes are
over 2.2TB capacity.
Click the Next button to continue.
7. Review your parameters.
To make changes, click the Previous button.
To accept the parameters and configure your DAS system, click the OK
button.
8. In the Final Confirm popup window, click the Yes button.
9. In the Warning popup window, type YES into the field and click the OK
button.
See “Advanced Setup” on page 39.
Locating the SmartStor
This feature helps you to physically locate a DAS system.
To locate a SmartStor:
1. Go to the Main Window.
See “Opening the Main Window” on page 19.
2. Click the system in the Device List that you want to locate.
To Next Page
Loading...
