SmartStor DS4600 Product Manual
130
Figure 1. SmartStor front and back views
Removing Disk Drives
To remove disk drives:
1. Open the SmartStor’s front door.
2. Pull out the drive carrier from the enclosure.
3. Carefully remove the disk drive from the drive carrier, so that the screw holes
on the sides of the carrier align with the screw holes in the drive. See
page 131, Figure 2.
4. Remove the screws from the holes in the drive carrier and the sides of the
disk drive.
5. Remove four screws per drive.
System Status LED
Power Button
Power Connection
Disk Activity LED
Reset Button
To Next Page
Loading...
