Chapter 1: Introduction to SmartStor
3
Specifications
• Disk drive support:
• Four 1.5 Gb/s or 3 Gb/s SATA 3.5-inch disk drives
• Conforms to Serial ATA 1.0 specification and Serial ATA II: Extensions
to Serial ATA 1.0 specification (SATA II, phase I specification)
• SATA specification of 3 Gb/s transfers with CRC error-checking
• FireWire 800 (IEEE 1394-2000) host interface x2
• FireWire 400 (IEEE 1394-1995) host interface x1
• USB 2.0 host interface x1
• eSATA host interface x1
• Hot-swapping of disk drives
• Tagged command queuing
• Native command queuing
• Drive roaming among channels
• S.M.A.R.T. status polled every 15 minutes
• Hot spare drive
• RAID Volume rebuilding
• Background rebuilding
• Spin-down in system Standby mode
• RAID level support: RAID 0, 1, 5, and 10
• Unicode file name support
• SATA RAID Controller: Oxford Semiconductor OXUFS936QSE
• USB port: USB 2.0, up to 480 Mb/s, Type-B connector
• Power Supply: 90-100W with PFC, 100-230V auto-ranging, 50-60Hz AC
• Error logging
• Hardware monitoring of:
• Temperature, Operating: 5° to 35°C (41° to 95°F)
• Humidity, Operating: 10 to 85 percent
• Dimensions (H x W x D): 188.2 x 152.5 x 229.6 mm (7.4 x 6.0 x 9.0 in)
• Weight: 2.5 kg (5.5 lbs) without drives
•Fan
• Temperature
• Power
• Disk status
• One-Touch button
• Enclosure status
To Next Page
Loading...
