SmartStor DS4600 Product Manual
112
If the SmartStor used to appear in the Main Window previously but is no longer
there, the SmartStor is probably locked up or frozen and requires a hard reboot.
Keep the SmartNAVI Main Window open during this procedure.
To hard reboot the SmartStor:
1. Press and hold the Power button for five seconds.
During a proper shutdown, the System Status LED turns RED, then goes
dark.
If the System Status LED stays BLUE, the SmartStor is locked up.
See Figure 3.
Caution
This action is appropriate only when there are no data transfers or
installations in progress.
Do not disconnect the power to reboot the SmartStor unless the
proper shutdown procedure does not work.
To Next Page
Loading...
