This section describes how to establish a connection and login as the administrator
to the operating system. There are two methods to establish the physical connection
used for management of the device. Management can be done remotely through the
network using text-based command line or web-based GUI. Or connect directly to the
server with a keyboard, mouse and monitor.
For the initial system conguration, follow the instructions below to connect and
keyboard and monitor so you can login to the operating system, then change the
network settings for the Ethernet ports to suit your network.
Connections for system management on rear panel:
1. VGA port
2. 1000BASE-T RJ-45 ports
3. USB 3.0 ports
21