DTV-Signal
In DTV mode, you can tune manually and adjust the angle. Orientation of the antenna etc.
Auto Ch Search
Press / to move the cursor to the item to be selected (item selected highlighted in yellow). Press ENTER key to enter
your selection and scan. After the scan is finished, the following menu will display. The channels found the automatically
saved as below:
Add On Ch Search
When the channels are found, use ENTER to add it to the cannel list
Manual Ch Set
Press ENTER button to display a channel list that you can select channel as below:
Channel Labels
Allows you to name the channel that is selected. Use / to move and use / to change.
Manual Language
To select language of the OSD such as English/ French and Spain.
To Next Page
Loading...
