ProStar 1K - Audio Alarm; UPS Working Status; LCD Display Information

20
4.3 Audio Alarm
4.4 UPS Working Status
Working status
LED indicator
INV
BATTERY
BYPASS
FAULT
UPS Startup
★
★
★
★
Bypass mode
○
○
●
○
AC mode
●
○
○
○
Battery mode
○
●
○
○
Battery self-test
★
★
★
★
ECO mode
●
○
●
○
Fault
○
○
○
●
Note: ● means LED is lighting, ★ means LED is flashing, ○ means LED is faded.
4.5 LCD Display Information
The LCD display information will be switched in turns by pressing or button. The selectable
information is switched as below: UPS input/output voltage, UPS input/output frequency,
battery voltage
and capacity(%)
,
UPS output voltage and power (W)
,
UPS output voltage and power (VA)
,
UPS output
voltage and load (%)
,
UPS software version
,
battery number
.
Battery Mode
Sounding every second
Low Battery
Sounding every second
Overload
Sounding every second
Fault
Continuously sounding
Inverter is not turned on
Sounding every 2 minutes
Other alarms
Sounding every 4 seconds