ProStar 1K - Deenergizing Safety; Standards

3
Batteries may cause electric shock and have a high short-circuit current. Please take the precautionary
measures specified below and any other measures necessary when working with batteries:
 remove wristwatches, rings and other metal objects.
 use only tools with insulated grips and handles.
When changing batteries, install the same number and same type of batteries.
Do not attempt to dispose of batteries by burning them. This could cause battery explosion.
Do not open or destroy batteries. Escaping electrolyte can cause injury to the skin and eyes. It may be
toxic.
1.7 Deenergizing Safety
The UPS contains internal batteries and may present a shock hazard even when disconnected from
branch circuit(mains). Before installing or servicing the equipment check that the:
 Input circuit breaker in the OFF position.
 Internal UPS batteries are removed.
1.8 Standards
* Safety
IEC/EN 62040-1
* EMI
Conducted Emission.
..................................
:IEC/EN 62040-2
Category C3
Radiated Emission
.......................................
:IEC/EN 62040-2
Category C3
*EMS
ESD
...................................................................
:IEC/EN 61000-4-2
Level 4
RS
.......................................................................
:IEC/EN 61000-4-3
Level 3
EFT
....................................................................
:IEC/EN 61000-4-4
Level 4
SURGE
.............................................................
:IEC/EN 61000-4-5
Level 4
CS
.......................................................................
:IEC/EN 61000-4-6
Level 3
Power-frequency Magnetic field
.................
:IEC/EN 61000-4-8
Level 4
Low Frequency Signals
................................
:IEC/EN 61000-2-2
Warning: This is a product for commercial and industrial application in the second
environment-installation restrictions or additional measures may be needed to prevent disturbances.