Prostat PRS-801B - Calibration Information; Replacement Parts and Accessories

28
Calibration Information
The resistance meter specifications are based on a 1 year calibration cycle. Recalibration must be
done by qualified personnel. Contact your local Prostat Authorized Calibration Lab for more
information about recalibration.
To find the firmware version of your resistance meter, turn off the meter and turn it back on. During
power up, the revision of the firmware will display for a few seconds.
Replacement Parts and Accessories
The resistance meter specifications are based on a 1 year calibration cycle. Recalibration must be
done by qualified personnel
Table 14 is a list of user-replaceable parts for the resistance meter models. To order replacement
parts, contact your Authorized Reseller. Table 15 is a list of optional accessories.
Part No.
Description
PRS-801B
Prostat Resistance System
PRS-812B
Prostat Resistance Meter
801B-012
Rechargeable Li-ion Battery Pack
800LB
10 foot Silicone Test Lead - Black
800LR
10 foot Silicone Test Lead - Red
800PSL
Shielded Test Lead
800TVL
High Resistance Voltage Test Lead
800S
Test Lead Shunt
PTB-915
Audit Test Bed
PRS-801BC
Bulldog Clip
PSI-870MAC
Metal Alligator Clip (2)
800B-001
AC/DC Power Supply with Multi-Blade Input
800B-002
USB 2.0 A to Micro-B Cable
801B-005
Rubber Side Grips - Black
812B-004
Rubber Side Grips - Grey
Connect 2.0 Software for Windows®
Table 14. Replacement Parts and Accessories
The Prostat accessories listed below are compatible with the meter. For more information about
these accessories and their prices, contact a Prostat Authorized Reseller.
Part No.
Description
PRS-801W
5lb Conductive Rubber Electrode
PRS-801-VW
Premium 5lb Conductive Rubber Electrodes
PRF-912B
Miniature Concentric Ring
PRF-922B
Miniature 2-Point Probe
PRF-911
Concentric Ring