7
Figure 1. Connect the provided charger to an outlet to charge your Resistance Meter
Figure 2. Connect the provided Micro USB Cable to a computer to charge your Resistance Meter
It is recommended to turn off the meter before plugging in the USB cable or wall charger. Once
charging has begun, you may leave the meter in its off position, or leave it on. The meter is capable of
making measurements while charging.
While the battery is charging, the state is represented by battery segments that grow from 1 to 5
segments in a 2.5 second period. This pattern is repeated until the battery is fully charged.
To Next Page
Loading...
