Proteco Q80S User Manual

Q80_V3_2014
Q80S
PROTECO S.r.l. Via Neive, 77 - 12050 Castagnito (CN) ITALY Tel. +39 0173 210111 - Fax +39 0173 210199 info@proteco.net - www.proteco.net
CONTROL PANEL FOR
SLIDING GATES
Multi-function control panel for sliding gate - 230Vac
• Programming display
• Electronic adjustment of working time
• Automatic programming procedure with obstacle detection (anti-crushing function) or step-by-step programming
procedure with electronic adjustment of power and deceleration.
• “Quick closing” function
• Pedestrian Opening function
• Multi-Occupation function.
• Pre-Blinking function.
• Additional radio channel (optional module)
• Built-in radio receiver 433,92MHz (64 codes) suitable for standard fix-code transmitters or rolling-code transmitters
.
• Terminal for safety edge 8K2 type
• Fault Diagnostic with display messages
230V ac
TECHNICAL FEATURES
Item code PQ80S
Control Panel Dimensions 137 x 84 x 37 mm
Box dimensions 220 x 290 x 90 mm
Control Panel Weight 160 g
Main Power 230V ~ 50-60Hz
Main Power Tolerance -10% +20%
Transformer 230/21Vac – 15VA
Main Fuse 5 A
Rated power input 600 W
Rated current 3.5 A
Current in stand-by mode 30 Ma
Blinker power supply 24 Vac, max 20 W
Accessories power supply 24 Vdc , max 5 W
Working temperature -20 +50 °C
Instructions Manual

Proteco Q80S Specifications

General

Power Supply	230V AC, 50Hz
Warranty	2 years
Lifting Capacity	80 kg
Speed	0.2 m/s
Safety Features	obstacle detection

Summary

Technical Features Overview

Safety Warnings

Wiring Diagram and Component Identification

Terminal Block Layout

Details of terminal blocks JP1 through JP9 and plugs J1, J5 for connections.

Control Buttons and Display

Explanation of the control panel's display segments and button operations.

Electric Wiring Guide

Motor and Limit Switch Wiring

Wiring instructions for connecting the gate motor and limit switches.

Control and Safety Input Wiring

Wiring for start, stop, pedestrian start, and photocell controls.

Safety Edge and Blinker Wiring

Connection details for safety edges and the flashing light.

Auxiliary Radio Channel Module Wiring

Installation and configuration of the optional radio channel module.

Programming and Configuration

Radio Control Programming

Saving and deleting remote control codes for START and PEDESTRIAN commands.

Programming Modes Selection

Guide to selecting automatic or sequential programming modes.

Force and Obstacle Adjustment

Adjusting motor torque/power and obstacle detection sensitivity.

Special Functions Configuration

Enabling functions like pre-blinking, deceleration, and motor test.

Troubleshooting Common Issues

Programming Parameter Reference

CE Compliance Declaration