....
(OFF)
....
(max)
Q80S_2014 22
PROTECO S.r.l.
Via Neive, 77 - 12050 Castagnito (CN) ITALY Tel. +39 0173 210111 - Fax +39 0173 210199 info@proteco.net - www.proteco.net
4.5 TIMES menu
Use this menu to adjust motors operating time and pause time before automatic closing.
Press button and use to select menu ,
then press button to enter the TIMES menu: display will show
Use buttons to scroll the lower level menus:
OPERATING TIME
Motor’s operating time is controlled by limit switches.
In case of fault of the limit switches the motor will stop running in any case after 120 seconds.
AUTOMATIC CLOSING Pause time
Use this menu set the pause time for the Automatic Closing (from 0 to 99 seconds).
1 Use buttons to move inside the menu, till the display shows:
2 Press button to confirm.
3 Use buttons to set the pause time for automatic closing:
4 Press button to go back to the top level menus,
then press button again till the display shows:
or wait the timeout (20 seconds) to exit.
PEDESTRIAN AUTOMATIC CLOSING Pause time
Use this menu set the pause time for the Pedestrian Automatic Closing (from 0 to 99 seconds).
1 Use buttons to move inside the menu, till the display shows:
2 Press button to confirm.
3 Use buttons to set the pause time for Pedestrian automatic closing:
4 Press button to go back to the top level menus,
then press button again till the display shows:
or wait the timeout (20 seconds) to exit.
(OFF)
(max)
To Next Page
Loading...
Need help?
General
