Need help?Do you have a question about the Protectowire FiberSystem 8000 and is the answer not in the manual?
Explains the FIBERSYSTEM 8000 PTS (Distributed Temperature Sensing) system and its Raman-OTDR technique for temperature measurement.
Details safety precautions, hazards, and warnings, including explanations of safety symbols like CAUTION and WARNING.
Describes various symbols and markings found on the instrument and their meanings.
Provides detailed safety information and specifications regarding the laser used in the instrument.
Details the product's compliance with environmental directives and disposal guidelines.
Provides instructions for setting up the hardware and initial system configuration of the FIBERSYSTEM 8000.
Guides the user through the process of installing necessary software for the FIBERSYSTEM 8000.
Explains how to connect the FIBERSYSTEM 8000 to a controlling PC via USB or LAN.
Describes the layout and functions of the front, rear, and connection panels of the FIBERSYSTEM 8000 instrument.
Explains the process and recommendations for properly terminating the fiber optic sensor cable for optimal performance.
Details how to connect the output relays and input lines to the FIBERSYSTEM 8000 for system integration.
Guides the user on how to power on, warm up, and initialize the FIBERSYSTEM 8000 instrument.
Provides instructions and safety precautions for cleaning the instrument's optical connectors, adapters, and housings.
Step-by-step instructions on how to safely replace the fuse in the FIBERSYSTEM 8000 instrument.
Outlines procedures for verifying the correct operation of the FIBERSYSTEM 8000, including boot process and error conditions.
Explains the process and requirements for returning the instrument to the service center.
Introduces the chapter containing specifications and characteristics for the FIBERSYSTEM 8000 Fiber Optic Linear Heat Detector.
Defines key terms and technical concepts used throughout the specifications section.
Details the requirements and importance of using angled connectors for the optical interface.
Presents detailed technical specifications for various models of the FIBERSYSTEM 8000.
General| Brand | Protectowire |
|---|---|
| Model | FiberSystem 8000 |
| Category | Controller |
| Language | English |
To Next Page