C__
--------)
C__ .)
C
.)
C__ ..)
Fig 11
demo as shown in fig 11
4 Modulation set up menus
The following paragraph will explain the various modulation
menus and the parameter that are needed to be set.
4.1 Linear sweep
Pressing the soft button corresponding to the linear sweep
the menu as shown in fig 12 is displayed on the LCD. The first
line displays the selected modulation and the second line
displays the sweep parameters and their corresponding soft
buttons to set these parameters.
Fig 12
F1: Start frequency
F2: Stop frequency
Tw: Sweep time
Ts: The time when the next sweep starts
OK: Confirms the settings and starts the sweep
Mode: Continuous
< extam Demo
MODE: linear sweep
f1 f2 tw ts OK
15
To Next Page
Loading...
Need help?
General
