Using the Remote Control
15
Note: To use a universal remote with your display, program the remote to control any NEC
television.
Replacing the Remote Batteries
The remote requires two AAA batteries, which are held in a small
enclosure on the rear of the remote.
To replace the batteries:
1. Release the tab and pull the enclosure out of the remote.
2. Remove the old batteries and replace them with the new batteries.
Ensure the batteries are oriented as indicated in the enclosure.
3. Snap the enclosure back into the remote.
Selects the aspect ratio used by the display: 4:3 or Full (16:9)
Adjusts the audio volume
Button(s) Function
FULL
4:3
OMPLTV3250-1.book Page 15 Monday, July 17, 2006 8:15 PM
To Next Page
Loading...
