Configuring the Display
19
TV
The TV menu allows you to select the television
signal type and select which television
channels are available for viewing, manually or
automatically. It contains the following menu
items:
Auto Scan
When selected, automatically scans all television channels for valid signals and makes
unavailable any channels with insufficient signal strength.
Channel System
Sets the type of television signal source in use. The options are as follows:
• Antenna—A standard television antenna
• Cable—A cable TV signal
• Cable-HRC—A type of cable signal primarily used on the West Coast of the US
• Cable-IRC—A type of cable signal primarily used on the East Coast of the US
Program Editor
Allows you to manually adjust which channels are available when flipping through channels.
Select Add Program to include the current channel and Delete Program to exclude it.
Fine Tune
Finely adjusts the reception frequency used for the current channel, for better reception.
PC
The PC menu allows you to change the video
options used with a VGA or HDMI video
source. You can adjust the following
parameters:
Auto Adjust
When turned on, automatically adjusts image position and synchronization.
Phase
Adjusts the phase of the video clock.
Clock
Adjusts the frequency of the video clock.
Display Adjustment
Controls the position of the image on the screen. Use the arrow keys to center the screen
image.
OMPLTV3250-1.book Page 19 Monday, July 17, 2006 8:15 PM
To Next Page
Loading...
