Tsunami
®
800 & 8000 Series - Software Management Guide 10
Preface
This chapter contains information on the following:
·
} z {
·
B {
y {
·
} {
·
B
·
k { x
·
x k
y
About this Guide
This guide gives a jump-start working knowledge of the Tsunami
®
800 and 8000 products. It explains the step-by-step
procedure to configure, manage and monitor the device by using Web Interface.
Products Covered
Given below are the products that are covered in this guide along with the latest software version supported by each of the
device.
Product(s) Supported Countries Supported Software Version
MP-8100-BSU US, WD, EU 2.6.1
MP-8200-BSU US, WD, EU, JP 2.6.1
MP-8250-BS9 US, WD, EU 2.6.1
MP-8250-BS1 US, WD, EU 2.6.1
MP-8100-SUA US, WD, EU 2.6.1
MP-8150-SUR US, WD, EU 2.6.1
MP-8150-SUR-100 US, WD, EU 2.6.1
MP-8150-CPE US, WD 2.6.1
MP-8200-SUA US, WD, EU, JP 2.6.1
MP-8250-SUR US, WD, EU, JP 2.6.1
MP-8160-BSU WD 2.6.1
MP-8160-BS9 WD 2.6.1
MP-8160-SUA WD 2.6.1
MP-8160-CPE-A100 WD 2.6.1
MP-820-BSU-100 US, WD, EU 2.6.2
MP-820-SUA-50
+
US, WD, EU 2.6.2
MP-825-SUR-50
+
US, WD, EU 2.6.2
MP-825-CPE-50 US, WD, EU 2.6.2
QB-8100-EPA/LNK US, WD, EU 2.6.1
To Next Page
Loading...
Need help?
General
