Tsunami
®
800 & 8000 Series - Software Management Guide 84
Figure 5-28 Edit a Link Profile (Basic)
5.4.1.2.1 Basic
Under Basic screen, you can configure and view the following parameters.
Parameter Description
Profile Name Represents the link profile name whose wireless parameters are edited. Enter a new name,
if you wish to edit the existing profile name.
DDRS Status Dynamic Data Rate Selection (DDRS) feature adjusts the transmission data rate to an
optimal value to provide the best possible throughput according to the current
communication conditions and link quality.
The factors for adjusting the transmission data rate are,
1. Remote average Signal-to-noise (SNR) ratio
2. Number of retransmissions
The DDRS Status parameter allows to either enable or disable DDRS per link profile. By
default, DDRS is enabled.
To Next Page
Loading...
Need help?
General
