28 User’s / Programming Guide
Code Identifier
A code identifier may optionally be transmitted with the message.
This option is provided so a host computer can identify the type of
bar code scanned, as well as the encoded information.
Scan Option FA to disable the code identifier.
FA Disable Code ID # *
Scan Option FB to enable the code identifier.
FB Enable Code ID
The table below shows the default code-identifier character assign-
ments. These can be changed using the procedure found in the Sym-
bology Identifier Section.
Table 4. Code Identifier Characters
SYMBOLOGY CODE IDENTIFIER
Code 39 a
Code Interleaved 2 of 5 b
Code Standard 2 of 5 c
UPC/EAN/JAN d
Code 128 f
Codabar h
To Next Page
Loading...
