54 User’s / Programming Guide
Symbology Identifiers
Your PSC scanner can be programmed to add and/or change symbol-
ogy identifiers which might be required to be transmitted with mes-
sages. This feature is provided to allow a host computer to recognize
the type of bar code scanned, as well as the uncoded information. The
symbology identifiers are selected by scanning the desired program-
ming bar code symbol as defined below.
SYMBOL FUNCTION
FE Set UPC-A Symbology Identifier
FF Set UPC-E Symbology Identifier
FG Set EAN-8 Symbology Identifier
FH Set EAN-13 Symbology Identifier
FI Set Code 128 Symbology Identifier
FA
Disable Transmission of
Symbology Identifiers*
FB
Enable Transmission of Symbology
Identifiers
To Next Page
Loading...
