PUDU T300 Operation Guide
Version: V1.0.2 Operation Guide
23
The details are as follows:
4.4.2.1 Module Settings
Functions of each business module (same as described in Sections 4.1 to 4.3)
4.4.2.2 Calling function
Remote call related content can be set. Including network call, PUDU pager, microservice, etc.
(1) Enable Call
When enable, the robot can respond to remote calls. If you need to use the call function, you
can turn on this switch.
(2) Online Network Call
When the switch is turned on, the robot can call the robot through pudulink APP, 4G watch,
open interface and other methods that rely on network links.
(3) Calling from PuDu Pager
You can configure the PUDU Pager here. For specific deployment methods, please contact
technical support.
(4) Local Microservice
After turning it on, you can use microservice in LAN to call the robot. For specific deployment
To Next Page
Loading...
