Pudu T300 - Safety Instructions; Electrical Requirements; Use Requirements; Environmental Requirements

PUDU T300 Operation Guide
Version: V1.0.2 Operation Guide
1
1. Safety Instructions
1.1 Electrical requirements
 It is strictly prohibited to use chargers other than the original charger to charge the
robot. If the charger is found to be faulty, please replace it as soon as possible.
 Please fully charge the battery to 100% before first use.
 Be sure to charge the robot as soon as it has less than 20% power remaining. Working
at low battery levels for long periods will shorten the battery's service life.
 Make sure that the power supply voltage complies with the voltage range on the
charger, otherwise the charger may be damaged.
 Please do not drop the charger or hit it with foreign objects to avoid damage.
 Please dispose of the battery according to local regulations and do not dispose of it
as household waste. Improper handling may cause the battery to explode.
1.2 Use requirements
 Do not block the robot sensor. Otherwise, the robot may fail to move properly or get
lost.
 Cleaning or maintenance work is prohibited while the robot is powered on.
 Do not place cookers with naked flames or flammable or explosive items on the robot.
 Do not pick up or place any items while the robot is moving, to avoid property losses
or personal injury caused by accidental collisions.
 Do not push or carry the robot while it is moving, to prevent it from running
abnormally.
 The robot must not be disassembled or repaired by anyone other than trained
professionals. In case of any fault with the robot, please contact a technical support
engineer immediately.
 When moving the robot, please observe the requirements on the maximum allowed
weight for a single person stipulated by local laws or regulations. While the robot is being
moved, please be sure to always keep it in an upright position.
 When the robot is in motion, no playing is allowed in front of the robot to avoid
unnecessary harm.
 Although the robot features automatic obstacle avoidance, never block the robot
moving at a high speed to avoid any accidents.
 Please prevent the robot from violent impact or shock to avoid any damage.
 Do not clean the robot with caustic chemicals, cleansers, or detergents. Always clean
the robot by wiping it with a clean and dry cloth.
1.3 Environmental requirements
 Do not use or charge the robot in dangerous environments with high temperature,
high pressure, or risks of flames or explosions, so as to avoid personal injury or damage
to the product.