Puls CP Series - Approvals and Declarations; Rohs, REACH and Other Fulfilled Standards

CP10.241-60
CP-Series
24V, 200W, DC/DC CONVERTER
P R E L I M I N A R Y
20. APPROVALS AND DECLARATIONS
EC Declaration of Conformity
planned
The CE mark indicates conformance with the
- EMC directive and the
- Low-voltage directive
IEC 60950-1
2
nd
Edition
planned
CB Scheme,
Information Technology Equipment
UL 508
planned
IND. CONT. E
Q.
Listed for use as Industrial Control Equipment;
U.S.A. (UL 508) and Canada (C22.2 No. 107-1-01);
E-File: E198865
UL 60950-1
2
nd
Edition
planned
Recognized for use as Information Technology Equipment,
Level 5; U.S.A. (UL 60950-1) and Canada (C22.2 No. 60950-1);
E-File: E137006
Applicable for altitudes up to 2000m.
Railway applications - Electronic
equipment used on rolling stock.
EN 50155:2007
planned
The manufacturer’s declaration indicate conformance with
the following characteristics:
- Altitude category: AX (EN 50125-1 § 4.2.1)
- Environmental category: TX (EN 50155 § 4.1.2)
- Interruption of voltage supply: S2 (EN 50155 § 5.1.1.2)
- Supply change over: C2 (EN 50155 § 5.1.3)
- Shock and vibration: Category 1, Class A and B (EN 61373)
- EMI: EN 50121-3-2
- Fire Classification: HL3 (EN 45545-2)
EAC TR Registration
Registration for the Eurasian Customs Union market
(Russia, Kazakhstan, Belarus)
21. ROHS, REACH AND OTHER FULFILLED STANDARDS
RoHS Directive Directive 2011/65/EU of the European Parliament and the
Council of June 8
th
, 2011 on the restriction of the use of
certain hazardous substances in electrical and electronic
equipment.
REACH Directive
Directive 1907/2006/EU of the European Parliament and the
Council of June 1
st
, 2007 regarding the Registration,
Evaluation, Authorisation and Restriction of Chemicals
(REACH)
May 2017 / Rev. 0.1 DS-QS10.241-60-EN preliminary
All parameters are typical values specified at 24V, 8.3A output, 110Vdc input, 25°C ambient and after a 5 minutes run-in time
unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
17/27