CP10.241-60
CP-Series
24V, 200W, DC/DC CONVERTER
P R E L I M I N A R Y
10. EFFICIENCY AND POWER LOSSES
DC 96V DC 110V
Efficiency Typ. 94.3% 94.5% At 24V, 8.3A
Average efficiency
*)
Typ. 93.1% 93.5% 25% at 2.1A, 25% at 4.2A,
25% at 6.2A. 25% at 8.3A
Power losses Typ. 2.8W 2.6W At 24V, 0A
Typ. 7.2W 6.8W At 24V, 4.2A (= 50% load)
Typ. 12.1W 11.6W At 24V, 8.3A
*) The average efficiency is an assumption for a typical application where the DC/DC converter is loaded with 25% of the nominal load for
25% of the time, 50% of the nominal load for another 25% of the time, 75% of the nominal load for another 25% of the time and with
100% of the nominal load for the rest of the time.
Fig. 10-1 Efficiency vs. output current, at 24V,
typ.
Fig. 10-2 Losses vs. output current, at 24V,
typ.
Efficiency
123456789A
87
88
89
90
91
92
Output Current
93
94
95%
(a) 96Vdc,
(b) 110Vdc
(a)
(b)
Power Losses
01234567 9A
0
2
8
10
Output Current
12W
8
4
6
(a) 96Vdc,
(b) 110Vdc
(a)
(b)
May 2017 / Rev. 0.1 DS-QS10.241-60-EN preliminary
All parameters are typical values specified at 24V, 8.3A output, 110Vdc input, 25°C ambient and after a 5 minutes run-in time
unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
9/27
To Next Page
Loading...
