56
. = It is the page for making the calibraon with weight. It is done by pung
weight on the scale.
WARNING! : IF THE DEVICE IS USED FOR THE FIRST TIME, FIRST OF ALL, THE
ACTIONS IN THIS STEP MUST BE PERFORMED.
• = The submenu where Load Cell Precision (mV/V) will be entered.
The key is pressed. By using and keys, sensivity valur is entered.
Value is confirmed and saved by pressing the key . Maximum 4 mV/V can be
selected. For Load Cell precision, refer to the technical documentaon of Load Cell.
• = The page where load capacity (kg) is entered. The key is pressed.
The capacity is entered via the keys and . Value is confirmed and saved
by pressing the key . For Load Cell capacity, refer to the technical
documentaon of Load Cell.
= The page where display step (division) is determined. With the key ,
the page where you can make change appears. Display step can take values. Desired
value can be selected with the keys and . Value is confirmed and saved
by pressing the key .
ENT
ENT
ENT
ENT
ENT
ENT
Once selected, screen view will be as follows:
Once selected, screen view will be as follows:
Once selected, screen view will be as follows:
Once selected, screen view will be as follows:
Once selected, screen view will be as follows:
Once selected, screen view will be as follows:
To Next Page
Loading...
Need help?
General