Pulsafeeder MicroVision User Manual

72-910-16 Rev. N
Page 19 of 43
Date/Time – Set the current date, date format, time, and time format.
HOA Outputs – Manually control the four output relays.
Water Meter – Set the water meter type and volume.
Language – Change the controller displayed language.
Drum Levels – Set the control output mode when a drum level goes low.
Display Dampener – Set the display and control update period.
Rise/Fall – Select between a rising or falling Setpoint mode of operation.
Contrast – Set the display contrast.
Password – Set the user password.
Troubleshoot – View the signal inputs in real-time to diagnose wiring problems.
Software Version – Displays the current software version.
Factory Restore – Restore the parameters to factory default.
7.7 Date/Time Menu
From the Date/Time menu you can set the data and time as well as the date and time display
formats.
Set Date – Set the current date.
Set Time – Set the current time.
Date Format – Pick the day/month/year format.
Time Format – Pick the 12-hour or 24-hour time of day format.
7.8 HOA Outputs Menu
From the HOA Outputs menu you can manually set the four relay control outputs. This is useful
for servicing chemical pumps or troubleshooting electrical problems. You must first select the
relay output to be controlled then select the relay state.
Bleed – Force the bleed control output on or off.
Inhibitor – Force the inhibitor control output on or off.
Home Screen
HOA Outputs
Bleed
Inhibitor
Biocide A
Biocide B
Back | Select
Auto
On 5 Min
Off
Back | Select
Home Screen
Configure
Date/Time
Set Date
Set Time
Date Format
Time Format
Back | Select

Pulsafeeder MicroVision Specifications

General

Brand	Pulsafeeder
Model	MicroVision
Category	Controller
Language	English