Pulsafeeder MicroVision - Factory Default Settings

72-910-16 Rev. N
Page 33 of 43
9. Factory Defaults
Parameter
Default
Configuration
 Date Format
MM/DD/YY
 Time Format
12hr Clock
 Water Meter Type
Dry Contact
 Water Meter Pulse Volume
100
 Water Meter Units
Gallons
 Drum Levels
Pumps Run
 Display Dampener
1 Second
 Rise/Fall Setpoint
Rising
 Display Contrast
26
 Password
0000(disabled)
 Language
English
Settings
 Conductivity Setpoint
1500
 Conductivity Differential
50
 Conductivity Limit Timer
00:00(disabled)
 Alarm Setpoint
Track Setpoint/200us
 4-20ma Low Range
0
 4-20ma High Range
9999
 Inhibitor Feed Mode
Limit Timer
 Inhibitor Limit Timer
1-hour, 30-minutes
 Inhibitor Biocide Tracking
None
 Biocide A and B Days/Weeks
All Days/All weeks
 Biocide A and B Start Times
00:00(disabled)
 Biocide A and B Feed Time
1-minute
 Biocide A and B Pre-Bleed Time
00:00(disabled)
 Biocide A and B Pre-Bleed Conductivity
Minimum
1475
 Biocide A and B Bleed Lockout
00:00(disabled)