72-910-16 Rev. N
Page 30 of 43
7.27 Biocide A or B – Days/Weeks Menu
From this menu configure the days and weeks the biocide will feed. Any combination of days
and/or weeks is acceptable for each biocide feed timer.
- Select the biocide start days and weeks by using the up and down buttons to the right
of the display. Move the cursor to the right or left by using the button to the bottom of the
display. The selected day or week will flash as the cursor is moved to each setting. The
flashing On|Off text indicates if the current setting is on or off.
- If a day or week is highlighted, or appears as reverse video, that particular day or week
will have biocide feed.
- The week # shown in the lower right of the display indicates which week number the
controller’s time is currently set to.
ALL | SUN| MON| TUE
WED| THU| FRI | SAT
Days On|Off
Cancel | Enter
ALL | EVN| ODD| 1ST
2ND | 3RD| 4TH |
Weeks On|Off Wk#2
Cancel | Enter
To Next Page
Loading...
Need help?
General
