Pulsafeeder PULSAR 25HJ - APPENDIX III OIL SPECIFICATIONS; PULSAlube # 7 H; PULSAlube # 8 G

42
13. APPENDIX III
OIL SPECIFICATIONS
PULSAlube # 7H
API Gravity (ASTM D 287) = 31
Viscosity (ASTM D 2161) SSU @ 100 F = 175
Viscosity (ASTM D 2161) SSU @ 210 F = 51
Viscosity Index (ASTM D 2270) = 193
Pour Point (ASTM D 97) Degrees F (C) = -60(-51)
Flash Point, COC (ASTM D 92) Degrees F (C) = 367(186)
Fire Point, COC (ASTM D 92) Degrees F (C) = 403(205)
Color = purple
PULSAlube # 8G
AGMA Number = 7 EP
ISO Viscosity Grade = 460
API Gravity (ASTM D 287) = 34.1
Viscosity (ASTM D 2161) SSU @ 100 F = 2241
Viscosity (ASTM D 2161) SSU @ 210 F = 225
Viscosity Index (ASTM D 2270) = 167
Pour Point (ASTM D 97) Degrees F (C) = -40(-40)
Flash Point, COC (ASTM D 92) Degrees F (C) = 490(254)
Timken OK Load (ASTM D 2782) Lb(kg) = 100+(45+)
Four Ball EP Test (ASTM D 2783)
Weld Point kg = 250
Load Wear Index = 47
Rust Test (ASTM D 665A&B) = Pass
Oxidation Test (ASTM D 2893) = Pass
Demulsibility Test (ASTM D 2711) = Pass
Foam Test (ASTM D 892) = Pass
Copper Corrosion (ASTM D 130) = 1-A
Color = amber