Page 99
Tables
P796 Reset Breakpoints
This parameter allows the resetting, to the default value, of all previously set
breakpoints (P730-793), without having to access them individually. When
it is necessary to reset or amend particular breakpoints this can be achieved
by directly accessing the desired parameter (P730-793) and changing as
required.
P797Number of Breakpoints Set
This parameter allows you to review the number of breakpoints that have
been set, without the need to access each individual one in turn, this is a
“Read Only “ parameter and no values can be entered.
Average Flow
P863 Average Flow
This parameter will display the Average Flow for the time period set in
Average Time (P864). It is read only and cannot be changed.
P864 Average Time
This parameter will set the time period over which the Average Flow (P863)
is to be calculated before being displayed.
To Next Page
Loading...
