Pulsar FlowCERT LITE User Manual

Page 119
P974 Start Week
This parameter will determine the week of the month (P975) in which
Daylight Saving Time is to start.
Option
Description
1= Week 1
DST will start on day (P973) in the first week
(P974) of the month (P975).
2= Week 2
DST will start on day (P973) in the second
week (P974) of the month (P975).
3= Week 3
DST will start on day (P973) in the third week
(P974) of the month (P975).
4= Week 4
DST will start on day (P973) in the fourth week
(P974) of the month (P975).
5= Last (Default)
DST will start on day (P973) in the last week
(P974) of the month (P975).
P975 Start Month
This parameter is used to select the month, in which Daylight Saving Time
will start.
Option
Description
1= January
DST will start during the month of January
2= February
DST will start during the month of February
3=March (Default)
DST will start during the month of March
4= April
DST will start during the month of April
5= May
DST will start during the month of May
6= June
DST will start during the month of June
7= July
DST will start during the month of July
8= August
DST will start during the month of August
9= September
DST will start during the month of September
10= October
DST will start during the month of October
11= November
DST will start during the month of November
12= December
DST will start during the month of December
P976 DST End Time
This parameter is used to set the time of day at which Daylight Saving
Time will end, the time is entered in the format HH: MM (24-hour format).
Default = 02:00.

Pulsar FlowCERT LITE Specifications

General

Brand	Pulsar
Model	FlowCERT LITE
Category	Measuring Instruments
Language	English