EasyManua.ls Logo

Pulsar FXQ30 - Page 11

Pulsar FXQ30
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note: Two batteries can be charged at the same time, a second slot is provided for it.
LED indication (19) in the battery charging mode
Battery Level
Battery charge level is from 0% to 25%
Battery charge level is from 26% to 50%
Battery charge level is from 51% to 80%
Battery charge level is from 81% to 99%
Battery is fully charged. It can be
disconnected from the charger.
Defective battery. Do not use the battery!
LED indication (19) in the standby mode*
Battery Level
Battery charge level is from 0% to 25%
Battery charge level is from 26% to 50%
Battery charge level is from 51% to 80%
Battery charge level is from 81% to 99%
Battery is fully charged. It can be
disconnected from the charger.
Defective battery. Do not use the battery!
* Standby mode is when the batteries are in the charger but the Power Adapter is not connected. In this
mode, the indicators are only on for 10 seconds.
Attention! When using a Power Adapter that does not support USB Power Delivery fast charging
technology, the flicker frequency of the LED indicators decreases by a factor of 3 and the charge time
increases.
Attention! The charger heats up during fast charging. Excess heat is removed through the radiator and
does not affect the device operation.

Related product manuals