• When this mode is selected, the computer is used as an external power supply. The icon appears
in the status bar. The device will continue operating and all the functions are available.
• A battery installed in the device will not be charged.
• When disconnecting the USB from the device connected in Use as power mode, the device will continue
to operate from the rechargeable battery if it is present and provided it has enough charge.
Use as memory card
• When this mode is selected, the device is recognized by the computer as a flash card. This option is
designed for working with files that are stored on the device’s built-in memory. However, the device
functions are not available in this mode and it will switch off automatically.
• If video recording was in progress when the connection was made, recording stops and the video is
saved.
• When USB cable is disconnected from the device in Use as memory card mode, the device remains
turned OFF. Press the ON/OFF (6) button to turn on the device.
TECHNICAL INSPECTION
It is recommended to carry out a technical inspection before each use of the device. Check the
following:
• The device appearance (there should be no cracks on the body).
• The state of the objective and eyepiece lenses of the attachment (there should be no cracks, grease
spots, dirt or other deposits).
• The state of the rechargeable battery (it should be charged) and the electric contacts (there should be
no signs of salts or oxidation).
• The controls should be in working order.
• The attachment is properly and firmly fixed on the riflescope.
To Next Page
Loading...
