4. Rotate the controller ring (8) to set your desired password. Press the controller button (8) to toggle the
digits.
5. Press and hold down the controller button (8) to save the password and exit the submenu.
Access Level Setup
This submenu allows you to set access levels of Stream Vision application to your device.
• Access level Owner. Stream Vision user has complete access to all device's functions.
• Access level Guest. Stream Vision user has access only to real time video stream from the device.
1. Rotate the controller ring (8) to select the Access Level Setup menu item.
2. A short press of the controller button (8) opens the submenu.
3. Rotate the controller ring (8) to select Owner or Guest.
4. Confirm your selection with a short press of the controller button (8).
GENERAL SETTINGS
This menu section allows you to change the interface language, set the date, time, units of measure,
return the device to factory default settings and perform memory card formatting.
1. Press and hold the controller button (8) to enter the menu.
2. Rotate the controller ring (8) to select the General Settings menu item.
3. A short press of the controller button (8) opens the submenu.
Icon Brightness
Adjust brightness level of the icons and screensavers (Pulsar, Display off) on the display.
1. Rotate the controller ring (8) to select the Icon Brightness icon.
2. Press the controller button (8) briefly to enter the submenu.
3. Rotate the controller ring (8) to select the desired brightness level from 0 to 10.
4. Press the controller button (8) briefly to confirm the selection.
To Next Page
Loading...
