4. Turn Bluetooth on/off with a short press of the controller button (8).
5. Press and hold down the controller button (8) to exit the submenu.
The process of connecting the wireless remote control is described in the Remote Control
Activation section.
CALIBRATION MODE
Calibration mode selection
There are three calibration modes: Manual, Semi-Automatic and Automatic.
1. Press and hold the controller button (8) to enter the main menu.
2. Rotate the controller ring (8) to select the Calibration Mode icon.
3. Press the controller button (8) briefly to enter the submenu.
4. Rotate the controller ring (8) to select one of the calibration modes described below.
5. Press the controller button (8) briefly to confirm the selection.
Automatic (A). In this mode the firmware determines the need for calibration. The calibration process
starts automatically.
Semi-Automatic (SA). The user determines the need for calibration based on the image quality and can
action at a convenient time depending on the object being observed.
Manual (M). In the Manual (silent) calibration mode the user determines the need for calibration (as
in SA mode) but the lens cover must be closed during calibration.
VIDEO RECORDING AND PHOTOGRAPHY
The Proton FXQ30 thermal imaging attachments are equipped with the option to record video and still
images (photography) of the observed image by saving them on the built-in memory card.
It is recommended to set the date and time (see the General Settings section) before using the photo
and video functions.
The built-in recorder operates in two modes:
To Next Page
Loading...
