Wireless Remote Control
Descriptions of Controls
The wireless remote control duplicates the functions of turning off the device, turning off the display,
calibration, switching observation modes and palettes, video recording and photographing, and it allows
navigation through the menu.
Remote Control Activation
1. Turn on the Bluetooth module (see the Bluetooth section).
2. In the Bluetooth section of the menu, use the controller ring (8) to select the Scan menu item.
3. Confirm your selection with a short press of the controller button (8) button.
4. Press and hold any button on the Remote Control. The Remote Control is visible in the Bluetooth
network and can be connected during this time.
5. Use the controller ring (8) to select the remote control from the dropdown list that appears.
6. Confirm your selection with a short press of the controller button (8) button.
Notes:
To Next Page
Loading...
